EMT Practice Test

1. Question Content...

---

Question1: A backup application is copying only changed files each line it runs. During a restore, however, only a single file is used. Which of the following backup methods does this describe?

Question2: Which of the following BEST describes a guarantee of the amount of time it will take to restore a downed service?

Question3: A technician has received multiple reports of issues with a server. The server occasionally has a BSOD, powers off unexpectedly, and has fans that run continuously. Which of the following BEST represents what the technician should investigate during troubleshooting?

Question4: Which of the following BEST describes the concept of right to downgrade?

Question5: A server administrator is creating a script that will move files only if they were created before a date input by the user. Which of the following constructs will allow the script to apply this test until all available files are assessed?

Question6: A technician wants to limit disk usage on a server. Which of the following should the technician implement?

Question7: While running a local network security scan an administrator discovers communication between clients and one of the web servers is happening in cleartext. Company policy requires all communication lo be encrypted. Which of the following ports should be closed to stop the deartext communication?

Question8: A server administrator needs to ensure all Window-based servers within a data center have RDP disabled. There are thousands of servers performing various roles. Which of the following is the best way to meet this requirement?

Question9: A server administrator was asked to build a storage array with the highest possible capacity. Which of the following RAID levels should the administrator choose?

Question10: A server technician arrives at a data center to troubleshoot a physical server that is not responding to remote management software. The technician discovers the servers in the data center are not connected to a KVM switch, and their out-of-band management cards have not been configured. Which of the following should the technician do to access the server for troubleshooting purposes?

Question11: An administrator has been asked to increase the storage capacity of a stand-alone file server but no further expansion slots are available. Which of the following would be the FASTEST solution to implement with no downtime?

Question12: Which of the following commands would MOST likely be used to register a new service on a Windows OS?

Question13: A server administrator made a change in a server's BIOS in an attempt to fix an issue with the OS not turning on. However, the change did not successfully correct the issue. Which of the following should the server administrator do NEXT?

Question14: A storage engineer responds to an alarm on a storage array and finds the battery on the RAID controller needs to be replaced. However, the replacement part will not be available for 14 days. The engineer needs to identify the impact of the failed battery on the system. Which of the following best describes the impact?

Question15: A server administrator just installed a new physical server and needs to harden the OS. Which of the following best describes the OS hardening method?

Question16: Users cannot access a new server by name, but the server does respond to a ping request using its IP address. All the user workstations receive their IP information from a DHCP server. Which of the following would be the best step to perform NEXT?

Question17: A user can successfully connect to a database server from a home office but is unable to access it from a hotel room. Which of the following authentication methods is most likely configured?

Question18: A company's servers are all displaying the wrong time. The server administrator confirms the time source is correct. Which of the following is MOST likely preventing the servers from obtaining the correct time?

Question19: After installing a new file server, a technician notices the read times for accessing the same file are slower than the read times for other file servers.
Which of the following is the first step the technician should take?

Question20: A technician is configuring a point-to-point heartbeat connection between two servers using IP addressing. Which of the following is the most efficient subnet mask for this connection?

Question21: Which of the following would be BEST to help protect an organization against social engineering?

Question22: Which of the following asset management documents is used to identify the location of a serves within a data center?

Question23: An administrator is alerted to a hardware failure in a mission-critical server. The alert states that two drives have failed. The administrator notes the drives are in different RAID 1 arrays, and both are hot-swappable. Which of the following steps will be the MOST efficient?

Question24: An administrator discovers a misconfiguration that impacts all servers but can be easily corrected. The administrator has a list of affected servers and a script to correct the issue. Which of the following scripting principles should the administrator use to cycle through the list of servers to deliver the needed change?

Question25: Which of the following script types would MOST likely be used on a modern Windows server OS?

Question26: A server technician is placing a newly configured server into a corporate environment. The server will be used by members of the accounting department, who are currently assigned by the VLAN identified below:

Which of the following IP address configurations should the technician assign to the new server so the members of the accounting group can access the server?

Question27: A systems administrator is setting up a server on a LAN that uses an address space that follows the RFC 1918 standard. Which of the following IP addresses should the administrator use to be in compliance with the standard?

Question28: A server administrator needs to create a new folder on a file server that only specific users can access. Which of the following BEST describes how the server administrator can accomplish this task?

Question29: Which of me following is the BEST action to perform before applying patches to one of the hosts in a high availability cluster?

Question30: An administrator is tasked with building an environment consisting of four servers that can each serve the same website. Which of the following concepts is described?

Question31: A server administrator is gathering business requirements to determine how frequently backups need to be performed on an application server. Which of the following is the administrator attempting to establish?

Question32: A server technician notices several of the servers in a data center are making loud noises. The servers are still working correctly, and no indicator lights show any issues. Which of the following should the technician do first to ensure the issues are corrected and the servers remain online?

Question33: A server administrator is trying to determine the cause of a slowdown on a database server. Upon investigation, the administrator determines the issue is in the storage subsystem. Which of the following will most likely resolve this issue?

Question34: A technician is troubleshooting a server issue. The technician has determined several possible causes of the issue and has identified various solutions. Which of the following should the technician do next?

Question35: An administrator restores several database files without error while participating in a mock disaster recovery exercise. Later, the administrator reports that the restored databases are corrupt and cannot be used. Which of the following would best describe what caused this issue?

Question36: A server administrator has configured a web server. Which of the following does the administrator need to install to make the website trusted?

Question37: An administrator discovers a Bash script file has the following permissions set in octal notation;
777
Which of the following is the MOST appropriate command to ensure only the root user can modify and execute the script?

Question38: An administrator has been asked to deploy a database server that provides the highest performance with fault tolerance. Which of the following RAID levels will fulfill this request?

Question39: Which of the following life-cycle management phases deals with a server that is no longer in operation?

Question40: A server in a remote datacenter is no longer responsive. Which of the following is the BEST solution to investigate this failure?

Question41: A storage administrator is investigating an issue with a failed hard drive. A technician replaced the drive in the storage array; however, there is still an issue with the logical volume. Which of the following best describes the NEXT step that should be completed to restore the volume?

Question42: A server administrator receives a report that Ann, a new user, is unable to save a file to her home directory on a server. The administrator checks Ann's home directory permissions and discovers the following:
dr-xr-xr-- /home/Ann
Which of the following commands should the administrator use to resolve the issue without granting unnecessary permissions?

Question43: Which of the following environmental controls must be carefully researched so the control itself does not cause the destruction of the server equipment?

Question44: A Linux server requires repetitive tasks for reconfiguration. Which of the following would be the best scripting language to use?

Question45: A server administrator must respond to tickets within a certain amount of time. The server administrator needs to adhere to the:

Question46: A technician retailed a new 4TB hard drive in a Windows server. Which of the following should the technician perform FIRST to provision the new drive?

Question47: An administrator is setting up a new server and has been asked to install an operating system that does not have a GUI because the server has limited resources. Which of the following installation options should the administrator use?

Question48: A Linux server was recently updated. Now, the server stops during the boot process with a blank screen and an f prompt. Which of the following is the most likely cause of this issue?

Question49: A server administrator has been creating new VMs one by one. The administrator notices the system requirements are very similar, even with different applications. Which of the following would help the administrator accomplish this task in the SHORTEST amount of time and meet the system requirements?

Question50: An administrator has been asked to verify that all traffic egressing from a company is secured. The administrator confirms all the information that is sent over the network is encrypted. Which of the following describes the type of traffic being encrypted?

Question51: Which of me following should be placed at the top of a Bash script to ensure it can be executed?

Question52: Which of the following policies would be BEST to deter a brute-force login attack?

Question53: A technician is installing a variety of servers in a rack. Which of the following is the BEST course of action for the technician to take while loading the rack?

Question54: Which of the following is the MOST appropriate scripting language to use for a logon script for a Linux box?

Question55: Which of the following BEST measures now much downtime an organization can tolerate Curing an unplanned outage?

Question56: A global organization keeps personnel application servers that are local to each country. However, a security audit shows these application servers are accessible from sites in other countries. Which of the following hardening techniques should the organization use to restrict access to only sites that are in the same country?

Question57: Which of the following licensing concepts is based on the number of logical processors a server has?

Question58: A hardware technician is installing 19 1U servers in a 42 the following unit sizes should be allocated per server?

Question59: An administrator is troubleshooting a failed NIC in an application server. The server uses DHCP to get all IP configurations, and the server must use a specific IP address. The administrator replaces the NIC, but then the server begins to receive a different and incorrect IP address. Which of the following will enable the server to get the proper IP address?

Question60: A systems administrator is trying to determine why users in the human resources department cannot access an application server. The systems administrator reviews the application logs but does not see any attempts by the users to access the application. Which of the following is preventing the users from accessing the application server?

Question61: A user logs in to a Linux server and attempts to run the following command:
sudo emacs /root/file
However the user gets the following message:
User userid is not allowed to execute Temacs' on this server. Which of the following would BEST allow the user to find out which commands can be used?

Question62: Which of the following cloud models is BEST described as running workloads on resources that are owned by the company and hosted in a company-owned data center, as well as on rented servers in another company's data center?

Question63: A human resources analyst is attempting to email the records for new employees to an outside payroll company. Each time the analyst sends an email containing employee records, the email is rejected with an error message. Other emails outside the company are sent correctly. Which of the following is MOST likely generating the error?

Question64: Which of the following licenses would MOST likely include vendor assistance?

Question65: Hosting data in different regional locations but not moving it for long periods of time describes:

Question66: Which of the following would MOST likely be part of the user authentication process when implementing SAML across multiple applications?

Question67: Which of the following backup types should be chosen for database servers?

Question68: A user has been unable to authenticate to the company's external, web-based database after clicking a link in an email that required the user to change the account password. Which of the following steps should the company take next?

Question69: A company wants to find an affordable way to simulate a fail over of a critical application. The company does not currently have a solution for it. The application consists of 15 servers, and the company would like to simulate on production configurations and IP address schemes. Which of the following would be the most cost-effective solution?

Question70: Which of the following must a server administrator do to ensure data on the SAN is not compromised if it is leaked?

Question71: An administrator has deployed a new virtual server from a template. After confirming access to the subnet's gateway, the administrator is unable to log on with the domain credentials. Which of the following is the most likely cause of the issue?

Question72: Which of the following backup types copies changed data from a server and then combines the backups on the backup target?

Question73: Which of the following licensing models is MOST appropriate tor a data center that has a variable daily equipment count?

Question74: Which of the following licensing models was created by software companies in response to the increasing density of processors?

Question75: A server administrator receives the following output when trying to ping a local host:

Which of the following is MOST likely the issue?

Question76: The HIDS logs on a server indicate a significant number of unauthorized access attempts via USB devices at startup. Which of the following steps should a server administrator take to BEST secure the server without limiting functionality?

Question77: A technician has beer tasked to install a new CPU. Prior to the retaliation the server must be configured. Which of the following should the technician update?

Question78: An application server's power cord was accidentally unplugged. After plugging the cord back in the server administrator notices some transactions were not written to the disk array. Which of the following is the MOST likely cause of the issue?

Question79: Which of the following should an administrator use to transfer log files from a Linux server to a Windows workstation?

Question80: A server administrator purchased a single license key to use for all the new servers that will be imaged this year. Which of the following MOST likely refers to the licensing type that will be used?

Question81: A company has a data center that is located at its headquarters, and it has a warm site that is located 20mi (32km) away, which serves as a DR location. Which of the following should the company design and implement to ensure its DR site is adequate?

Question82: A technician learns users are unable to tog in to a Linux server with known-working LDAP credentials. The technician logs in to the server with a local account and confirms the system is functional can communicate over the network, and is configured correctly However, the server log has entries regarding Kerberos errors. Which of the following is the MOST likely source of the issue?

Question83: A snapshot is a feature that can be used in hypervisors to:

Question84: An administrator is investigating several unexpected documents and video files that recently appeared in a network share. The administrator checks the properties of the files and sees the author's name on the documents is not a company employee. The administrator questions the other users, but no one knows anything about the files. The administrator then checks the log files and discovers the FTP protocol was used to copy the files to the server. Which of the following needs to be done to prevent this from happening again?

Question85: The accounting department needs more storage and wants to retain the current data for quick read-write access. The accounting server does not have any internet drive bays available to keep both disks however the server does have USB 3 0 and eSATA ports available. Which of the following is the BEST way to accomplish the department's goals?

Question86: A technician has several possible solutions to a reported server issue. Which of the following BEST represents how the technician should proceed with troubleshooting?

Question87: A technician is laying out a filesystem on a new Linux server. Which of the following tools would work BEST to allow the technician to increase a partition's size in the future without reformatting it?

Question88: A company needs to increase the security controls on its servers. An administrator is implementing MFA on all servers using cost effective techniques. Which of the following should the administrator use to satisfy the MFA requirement?

Question89: A technician is creating a network snare that will be used across both Unix and Windows clients at the same time. Users need read and write access to the files. Which of the following would be BEST for the technician to deploy?

Question90: An administrator has been asked to disable CPU hyperthreading on a server to satisfy a licensing issue. Which of the following best describes how the administrator will likely perform this action?

Question91: Which of the following DR testing scenarios is described as verbally walking through each step of the DR plan in the context of a meeting?

Question92: An administrator is configuring a server to communicate with a new storage array. To do so, the administrator enters the WWPN of the new array in the server's storage configuration. Which of the following technologies is the new connection using?

Question93: A technician is configuring a server that requires secure remote access. Which of the following ports should the technician use?

Question94: A technician needs to install a Type 1 hypervisor on a server. The server has SD card slots, a SAS controller, and a SATA controller, and it is attached to a NAS. On which of the following drive types should the technician install the hypervisor?

Question95: A company wants to deploy software to all users, Out very few of men will be using the software at any one point in time. Which of the following licensing models would be BEST lot the company?

Question96: A remote physical server is unable to communicate to the network through the available NICs, which were misconfigured. However, the server administrator is still able to configure the server remotely. Which of the following connection types is the server administrator using to access the server?

Question97: An administrator needs to disable root login over SSH. Which of the following tiles should be edited to complete this task?

Question98: A technician is deploying a single server to monitor and record me security cameras at a remote site, which of the following architecture types should be used to minimize cost?

Question99: A software developer is unable to reach an internal website. The developer's attempt to ping the FQDN returns the following IP address: 104.18.17.32. Which of the following is the most likely reason for this result?

Question100: Which of the following is used for fail over, providing access to all the services currently in use by an organization without having to physically move any servers or employees?

Question101: Users at a company work with highly sensitive dat
a. The security department implemented an administrative and technical control to enforce least-privilege access assigned to files. However, the security department has discovered unauthorized data exfiltration. Which of the following is the BEST way to protect the data from leaking?

Question102: Which of the following should be configured in pairs on a server to provide network redundancy?

Question103: A VLAN needs to be configured within a virtual environment for a new VM. Which of the following will ensure the VM receives a correct IP address?

Question104: A systems administrator notices a newly added server cannot see any of the LUNs on the SAN. The SAN switch and the local HBA do not display any link lights. Which of the following is most likely the issue?

Question105: A server administrator is exporting Windows system files before patching and saving them to the following location:
\\server1\ITDept\
Which of the following is a storage protocol that the administrator is MOST likely using to save this data?

Question106: Which of the following would a systems administrator implement to ensure all web traffic is secure?

Question107: A server administrator is installing a new server on a manufacturing floor. Because the server is publicly accessible, security requires the server to undergo hardware hardening. Which of the following actions should the administrator take?

Question108: Which of the following allows for a connection of devices to both sides inside of a blade enclosure?

Question109: A server administrator is reviewing the following specifications:
VM01 Host:
CPU: 2 Physical, 4 Cores
RAM: 16GB
Storage: 16TB
Server 1 on VM01:
CPU: 1 virtual socket, 1 core per socket
RAM: 4GB
Storage: 8TB
Server 2 on VM01:
CPU: 2 virtual sockets, 2 cores per socket
RAM: 8GB
Storage: 10TB
Which of the following is described given these specifications?

Question110: A server is reporting a hard drive S.M.A.R.T. error. When a technician checks on the drive, however, it appears that all drives in the server are functioning normally. Which of the following is the reason for this issue?

Question111: A very old PC is running a critical, proprietary application in MS-DOS. Administrators are concerned about the stability of this computer. Installation media has been lost, and the vendor is out of business. Which of the following would be the BEST course of action to preserve business continuity?

Question112: Which of the following concepts refers to prioritizing a connection that had previously worked successfully?

Question113: A recent power Outage caused email services to go down. A sever administrator also received alerts from the datacenter's UPS.
After some investigation, the server administrator learned that each POU was rated at a maximum Of 12A.
INSTRUCTIONS
Ensure power redundancy is implemented throughout each rack and UPS alarms are resolved. Ensure the maximum potential PDU consumption does not exceed 80% or 9.6A).
a. PDU selections must be changed using the pencil icon.
b. VM Hosts 1 and 2 and Mail Relay can be moved between racks.
c. Certain devices contain additional details

Question114: A server technician is configuring the IP address on a newly installed server. The documented configuration specifies using an IP address of 10.20.10.15 and a default gateway of 10.20.10.254. Which of the following subnet masks would be appropriate for this setup?

Question115: A company is building a new datacenter next to a busy parking lot. Which of the following is the BEST strategy to ensure wayward vehicle traffic does not interfere with datacenter operations?

Question116: A server administrator needs to check remotely for unnecessary running services across 12 servers. Which of the following tools should the administrator use?

Question117: A server administrator added a new drive to a server. However, the drive is not showing up as available. Which of the following does the administrator need to do to make the drive available?

Question118: A server administrator is testing a disaster recovery plan. The test involves creating a downtime scenario and taking the necessary steps. Which of the following testing methods is the administrator MOST likely performing?

Question119: Which of the following documents would be useful when trying to restore IT infrastructure operations after a non-planned interruption?

Question120: The management team has mandated the encryption of all server administration traffic. Which of the following should MOST likely be implemented?

Question121: A data center employee shows a driver's license to enter the facility Once the employee enters, the door immediately doses and locks, triggering a scale that then weighs the employee before granting access to another locked door. This is an example of.

Question122: A company deploys antivirus, anti-malware, and firewalls that can be assumed to be functioning properly. Which of the following is the MOST likely system vulnerability?

Question123: A server administrator mounted a new hard disk on a Linux system with a mount point of /newdisk. It was later determined that users were unable to create directories or files on the new mount point. Which of the following commands would successfully mount the drive with the required parameters?

Question124: Users are able to connect to the wireless network, but they are unable to access the internet. The network administrator verifies connectivity to all network devices, and there are no ISP outages. The server administrator removes the old address leases from the active leases pool, which allows users to access the internet. Which of the following is most likely causing the internet issue?

Question125: Which of the following is the most effective way to mitigate risks associated with privacy-related data leaks when sharing with a third party?

Question126: A data center has 4U rack servers that need to be replaced using VMs but without losing any dat a. Which of the following methods will MOST likely be used to replace these servers?

Question127: A technician is working on a Linux server. The customer has reported that files in the home directory are missing. The /etc/ f stab file has the following entry:
nfsserver:/home /home nfs defaults 0 0
However, a df -h /home command returns the following information:
/dev/sda2 10G 1G 9G 10% /home
Which of the following should the technician attempt FIRST to resolve the issue?

Question128: A server administrator is experiencing difficulty configuring MySQL on a Linux server. The administrator issues the getenforce command and receives the following output:
># Enforcing
Which of the following commands should the administrator issue to configure MySQL successfully?

Question129: An administrator is configuring a new server for use as a database server. It will have two mirrored drives to hold the operating system, and there will be three drive bays remaining for storage Which of the following RAID levels will yield the BEST combination of available space and redundancy?

Question130: A senior administrator instructs a technician to run the following script on a Linux server:
for i in {1..65536); do echo Si; telnet localhost $i; done
The script mostly returns the following message: Connection refused. However, there are several entries in the console display that look like this:
80
Connected to localhost
443
Connected to localhost
Which of the following actions should the technician perform NEXT?

Question131: A systems administrator recently installed a new virtual server. After completing the installation, the administrator was only able to reach a few of the servers on the network. While testing, the administrator discovered only servers that had similar IP addresses were reachable. Which of the following is the most likely cause of the issue?

Question132: A user cannot save large files to a directory on a Linux server that was accepting smaller files a few minutes ago. Which of the following commands should a technician use to identify the issue?

Question133: A server administrator is taking advantage of all the available bandwidth of the four NICs on the server. Which of the following NIC-teaming technologies should the server administrator utilize?

Question134: A remote, embedded loT server is having a Linux OS upgrade installed. Which of the following is the best method to stage the new media for the default boot device of the server?

Question135: A company's IDS has identified outbound traffic from one of the web servers coming over port 389 to an outside address. This server only hosts websites. The company's SOC administrator has asked a technician to harden this server. Which of the following would be the BEST way to complete this request?

Question136: A technician is monitoring a server and notices there is only one NIC plugged in. but the server has two. The NIC is oversaturated, and the technician would like to increase the available bandwidth. Which of the following solutions would be the BEST option to increase the speed of this NIC?

Question137: An administrator is rebooting servers manually after a group of updates were deployed through SCCM. The administrator notices several of the servers did not receive the deployed update. Which of the following should the administrator review first?

Question138: An administrator needs to reconfigure a teamed network connection on a server in a remote data center. Which of the following will offer the most resilient connection while performing this change?

Question139: A server room with many racks of servers is managed remotely with occasional on-site support. Which of the following would be the MOST cost-effective option to administer and troubleshoot network problems locally on the servers?

Question140: Winch of the following is a type of replication in which all files are replicated, all the time?

Question141: Which of me following BEST describes a disaster recovery site with a target storage array that receives replication traffic and servers that are only powered on In the event of a disaster?

Question142: A server is only able to connect to a gigabit switch at 100Mb. Other devices are able to access the network port at full gigabit speeds, and when the server is brought to another location, it is able to connect at full gigabit speed. Which of the following should an administrator check first?

Question143: Corporate policy mandates that logs from all servers be available for review regardless of the state of the server. Which of the following must be configured to comply with this policy?

Question144: Which of the following backup types only records changes to the data blocks on a virtual machine?

Question145: A technician runs top on a dual-core server and notes the following conditions:
top -- 14:32:27, 364 days, 14 users load average 60.5 12.4 13.6
Which of the following actions should the administrator take?

Question146: Which of the following can be BEST described as the amount of time a company can afford to be down during recovery from an outage?

Question147: A server administrator is swapping out the GPU card inside a server. Which of the following actions should the administrator take FIRST?

Question148: An administrator is configuring the storage for a new database server, which will host databases that are mainly used for archival lookups. Which of the following storage types will yield the fastest database read performance?

Question149: A server administrator is setting up a new payroll application. Compliance regulations require that all financial systems logs be stored in a central location. Which of the following should the administrator configure to ensure this requirement is met?

Question150: A junior administrator needs to configure a single RAID 5 volume out of four 200GB drives attached to the server using the maximum possible capacity. Upon completion, the server reports that all drives were used, and the approximate volume size is 400GB. Which of the following BEST describes the result of this configuration?

Question151: A server administrator is racking new servers in a cabinet with multiple connections from the servers to power supplies and the network. Which of the following should the administrator recommend to the organization to best address this situation?

Question152: An administrator notices high traffic on a certain subnet and would like to identify the source of the traffic. Which of the following tools should the administrator utilize?

Question153: Users have noticed a server is performing below Baseline expectations. While diagnosing me server, an administrator discovers disk drive performance has degraded. The administrator checks the diagnostics on the RAID controller and sees the battery on me controller has gone bad. Which of the following is causing the poor performance on the RAID array?

Question154: An organization implements split encryption keys for sensitive files. Which of the following types of risks does this mitigate?

Question155: An administrator is working locally in a data center with multiple server racks. Which of the following is the best low-cost option to connect to any server while on site?

Question156: Which of the following is a system that scans outgoing email for account numbers, sensitive phrases, and other forms of Pll?

Question157: A server administrator is configuring a new server that will hold large amounts of information. The server will need to be accessed by multiple users at the same time. Which of the following server roles will the administrator MOST likely need to install?

Question158: A Linux server was recently updated. Now, the server stops during the boot process with a blank screen and an £s> prompt. When of the following is the MOST likely cause of this issue?

Question159: A technician needs to deploy an operating system that would optimize server resources. Which of the following server installation methods would BEST meet this requirement?

Question160: An administrate is helping to replicate a large amount of data between two Windows servers. The administrator is unsure how much data has already been transferred. Which of the following will BEST ensure all the data is copied consistently?

Question161: A server administrator is completing an OS installation for a new server. The administrator patches the server with the latest vendor-suggested software, configures DHCP, and verifies all network cables are properly connected in the IDF, but there is no network connectivity. Which of the following is the MOST likely reason for the lack of connectivity?

Question162: A datacenter in a remote location lost power. The power has since been restored, but one ol the servers has not come back online. After some investigation, the server is found to still be powered off. Which of the following is the BEST method to power on the server remotely?

Question163: An administrator reviews a new server that was received from a vendor and notes the OS has been installed to a two-drive array configured with RAID 0. Which of the following best describes what will happen if a drive in that array fails?

Question164: A security technician generated a public/private key pair on a server. The technician needs to copy the key pair to another server on a different subnet. Which of the following is the most secure method to copy the keys?

Question165: Users report that the FinanceApp software is not running, and they need immediate access. Issues with the FinanceApp software occur every week after the IT team completes server system updates. The users, however, do not want to contact the help desk every time the issue occurs. The users also report the new MarketApp software is not usable when it crashes, which can cause significant downtime. The technician who restarted the MarketApp software noticed it is running under a test account, which is a likely cause of the crashes.
INSTRUCTIONS
Using the Services menu provided, modify the appropriate application services to remedy the stated issues.

Question166: Which of the following commands should a systems administrator use to create a batch script to map multiple shares'?

Question167: An administrator is installing a new file server that has four drive bays available. Which of the following RAID types would provide the MOST storage as well as disk redundancy?

Question168: A server administrator wants to check the open ports on a server. Which of the following commands should the administrator use to complete the task?

Question169: Several new components have been added to a mission-critical server, and corporate policy states all new components must meet server hardening requirements. Which of the following should be applied?

Question170: Ann, an administrator, is configuring a two-node cluster that will be deployed. To check the cluster's functionality, she shuts down the active node. Cluster behavior is as expected, and the passive node is now active. Ann powers on the server again and wants to return to the original configuration. Which of the following cluster features will allow Ann to complete this task?